A. Each sheet shall be eighteen (18) inches by twenty-six (26) inches and drawn so that the north arrow generally points toward the top of the sheet, generally parallel to the eighteen-inch dimension. Lettering shall read from left to right and from top to bottom of the sheet.

B. The sheet title shall be located in the lower right-hand corner, and a one-inch blank margin shall circumscribe the sheet.

C. Every sheet shall bear the tract name, scale, north point, sheet number and number of sheets comprising the map.

D. When the map consists of more than two (2) map sheets, a key map showing the relation of the sheets shall be placed on the first map sheet.

E. The exterior boundary of the land included within the subdivision shall be indicated by a solid colored line approximately one-eighth of an inch wide, which is capable of being reproduced on prints of the final map. The map shall show the definite location of the subdivision and particularly its relation to surrounding surveys.

F. The title sheet shall contain the title, consisting of words “Larkspur, California,” and the name of the tract, and such name shall not be the same as the name of any existing city, town, tract or subdivision of land into lots in this county, of which a map of plot has been previously recorded, or so nearly the same as to mislead the public or cause confusion as to identity thereof. If any of the land being subdivided has been previously shown on a recorded map, a subtitle referring to the recorded map shall be provided. Reference to tract and subdivisions in the description must be worded identically with original records, and reference to book and page of record must be completed.

G. A vicinity sketch which clearly locates the subdivision shall be included.

H. All lots shall be numbered consecutively with no omissions or duplications throughout the entire subdivision, including all units of any subdivision that have the same tract name but are designated by different units. No block division or numbering is required, but if desired by the subdivider, then each block shall be numbered consecutively. Circles or other geometric figures shall not be drawn around numbers. Each lot must be shown entirely on one sheet.

I. Dimensions of lots shall be given as to net dimensions to the boundaries of adjoining streets and shall be shown in feet and hundredths of feet. No ditto marks shall be used. Lots containing less than one acre shall show area in square feet. (Ord. 1030 § 2(11), 2018; Ord. 584 § 1 (part), 1977)